This is an old revision of the document!
To assess the throughput/rate in a deployed network, we can exploit different ways of computing the available link rate. Following RFC recommendations (e.g.: RFC 5136 “Defining Network Capacity, RFC 3148 “A Framework for Defining Empirical Bulk Transfer Capacity Metrics” or RFC “6349 “Framework for TCP Throughput Testing”), we have detailed in RFC ideas some interesting items regarding the ways to evaluate the network capacity.
We summarise below some of the specifications:
We recommend to compare at least two of the following OpenBACH jobs (iperf3 and nuttcp), which are based on active rate measurements (i.e. they perform measurements based on their own generated traffic):
iperf3(server or client) generate TCP/UDP traffic and performs different kind of measurements on this traffic. Regarding TCP traffic, it tries to charge the link (depending on the window size) and it is capable of measuring rate (b/s) and data sent (bits). Regarding the UDP traffic, it is possible to specify the bit rate, and it is capable of measuring rate (b/s), data sent (bits), packets sent, jitter (ms), loss and PLR.
iperf2(server or client): uses the version 2 of iperf. The configuration parameters and the metrics are the same of iperf3 job.
nuttcp(server or client): similar methodology and measurement of iperf3.
Regarding the rate metrology, it is also possible to perform passive test with jobs that measure the rate of the traffic generated by other components/jobs, such as the rate monitoring job (based on iptables packets/bits counting). It is recommended to do that for validation purposes, if you are not confident with the metrics shown by iperf3/nuttcp/iperf2.
We have prepared a OpenBACH reference scenario for the rate metrology: